Arti Nand Erase All Pada Odin
Im a newbee and i am stuck on the same thing. How did you solve your problem? Any help would be appreciated. Im trying to go to stock touchwiz from Cyanogenmod and im stuck in odin.
I pressed start and it says: Im using odin 3 v1.85 Enter CS for MD5. Do not unplug the cable.
T999UVALEMT999TMBALEMT999UVALEMHOME.tar.md5 is valid. Checking MD5 finished Sucessfully.
All threads completed. (succeed 0 / failed 0)What do i press after this?
I have the same exact thing like you have in the second post. What do i do?? Thats the problem. My phone did not reboot. Which is why im confused. And in the black space in Odin it says Epic 4G. Is that supposed to happen?
And then script says: Added!! Enter CS for MD5. Do not unplug the cable. T999UVALEMT999TMBALEMT999UVALEMHOME.tar.md5 is valid. Checking MD5 finished Sucessfully. Odin v.3 engine (ID:4). File analysis.
Get PIT for mapping. Firmware update start. Aboot.mbn NAND Write Start!!
Complete(Write) operation failed. All threads completed. (succeed 0 / failed 1). Thats the problem. My phone did not reboot.
Which is why im confused. And in the black space in odin it says epic 4g. Is that supposed to happen?
Arti Nand Erase All Pada Odin In Pc
And then script says: added!! Enter cs for md5. Do not unplug the cable. T999uvalemt999tmbalemt999uvalemhome.tar.md5 is valid. Checking md5 finished sucessfully. Odin v.3 engine (id:4). File analysis.
Get pit for mapping. Firmware update start. Aboot.mbn nand write start!! Complete(write) operation failed.
All threads completed. (succeed 0 / failed 1)sorry.i ment same problem is this post, not the first one. Enter CS for MD5. Do not unplug the cable.
Root66SPRL710VPBLJ7.tar.md5 is valid. Checking MD5 finished Sucessfully. Odin v.3 engine (ID:4).
File analysis. Get PIT for mapping.
Firmware update start. Sbl2.mbn NAND Write Start!!
Sbl3.mbn aboot.mbn FAIL! (Auth) All threads completed. (succeed 0 / failed 1)This is where i'm stuck.
Using odin 3.07. Root66SPRL710VPBLJ7.tar.md5 is valid. Aboot.mbn FAIL! (Auth)This is where i'm stuck. Using odin 3.07Two questions:- does your phone already have the stock 4.3 firmware loaded?- the file that's listed in the Odin log - what firmware is that based on?If I had to guess, your phone already had 4.3 (with the Knox bootloader) installed and you're trying to write an earlier firmware, which won't work.Sent from my rooted, debloated, deodexed Sinclair ZX-80 running CM -0.001 using Tapatalk.
Having similar problems. Get the same msgs. Have tried everything reinstalling countless of different driversMy issue is that I can't get my phone to connect to Odin (there is no sign in ID:COM block)Story is. I installed Cynogen, want to reinstall stock. But phone does not recognise Odin.!!!
HelpCouple of questions:1. Does your computer show your phone shortly after you plug your phone into your computer? If not, you might need the latest USB drivers from the Samsung web site.2. This one is really stupid, but is your phone in Odin mode when you're trying this? You get to Odin mode on your phone this way:Power your phone off, hold the volume down/home/power keys until you see a yellow triangle, then press the volume up key to access 'odin or download mode'.At this point you're ready to open Odin on your computer, and if your USB drivers are working, it should be ready to go. Be sure that you have the latest version of Odin, of course.
Pit file setup partitions - very useful if you broke some partition.Nand Erase All clean all partitions including internal sdcard before installing rom.EFS ( block 11 ) on note 3 doesn't contain IMEI ( all devices on snapdragon ).IMEI is on block 12 and 13. If you clean efs, the partition will be rebuild from block 12.So you can check the options Re-partition, Nand Erase All and also Phone EFS Clear to do clean Wipe.and make sure you have the PIT file of the respective device and STOCK ROM.